Nagarjuna Fertilizers and Chemicals Limited

Serving Society Through Industry   
 
           
Products and Services
   Services
Products and Services



Micro Irrigation

Among the top 3 Micro Irrigation companies in India, we offer products and services that ensure slow, regular and precise delivery of water and agricultural inputs to the crop. The result: Optimum growth and healthy plants, fewer pests, healthy environment and substantial cost savings.

Perhaps the most serious challenge of mankind in the 21st century will be the lack of fresh water. Population growth, pollution and climate change, all accelerating, are likely to combine to produce a drastic decline in water supply in the coming decades. Supplies are already problematic for up to a third of the world's population. As agriculture alone consumes 60% of today’s fresh water, it is imperative that water saving should start from here. Micro Irrigation can rightfully address these concerns.

Micro Irrigation

Nagarjuna’s Micro Irrigation business started in the year 1993 to address the irrigation problems of farmers living in water and energy scarce regions and also in regions where water, energy and agricultural input (labor, nutrition and plant protection) supplies are expensive. Since then, we have accumulated a depth of agronomic knowledge that enables it to respond to the specific needs of a crop and the grower with exactly the right product and service solution. We have been associated with Metzerplas of Israel and Profile Dies of Italy to bring world class solutions to our customers.

Agricultural fertilizers and suppliers

 


Products and Services

Our products are well accepted in the market place. The mainstay of our product portfolio is a range of 'Integral drip lines' branded 'Easydrip' & 'Ecodrip', and their variants. Our drip installations are functioning successfully in over 40000 hectares spanning a variety of crops such as Sugarcane, Cotton, Banana, Vegetables, Horticulture & Floriculture sites, etc., in five states of India namely Andhra Pradesh, Karnataka, Tamil Nadu, Maharashtra and Gujarat. A team of forty qualified and well-trained agriculture engineers and graduates and a set of seventy distributors support our Sales and Marketing efforts.

We have established high standards for our products and services. Compliance with BIS requirements being the minimum. We have some of the 'firsts' in the industry to our credit such as conducting periodic installation audits, making micro-irrigation systems user-friendly by training the farmers and providing user manuals in local languages, etc.

Following is the list of our products with technical specifications and usages.

Product
Technical Specifications
Usage
Head Control Unit
Non Return valve
As per IS 778:1984 specificationsClass 1Working pressure-1.0 MPaAvailable in different sizes from 1.5” to 4”Model horizontal typeScrewed female ends to BSP
Prevents Backflow
Air-Release Valve
Screwed male endPlastic bodyAvailable in 1” size
Releases entrapped air
Vacuum Breaker Valve
Plastic bodyAvailable in ½” size Screwed male end
Breaks vacuum in the system by sucking air from atmosphere
Hydro-Cyclone Filter
Available in 2”& 3” inlet/outlet size Available in flow range 20 & 40 m3 /hr.Threaded /flanged end connectionMS powder coated bodyNominal operating pressure 2 barClean pressure drop 0.2 barMaximum pressure 6 bar
Sand separator
Media Filter
Available in 2”, 2.5”& 3” inlet/outlet size Available in flow range 10-40 m3 /hr.Media used quartz of 2 to 4 mm gradeThreaded /flanged end connectionMS powder coated bodyNominal operating pressure 2 barMaximum pressure 5 barClean pressure drop 0.2 bar
Removal of organic impurities present in water source
Screen Filter
As per IS 12785:1994 specificationsAvailable in 2”, 2.5”& 3” inlet/outlet size Available in flow range 10-40 m3 /hr.Aperture size 125 micron (120 mesh)Male threaded end connectionMS powder coated bodyNominal operating pressure 2 barMaximum pressure 5 barClean pressure drop 0.2 bar
As a control filter, effective against suspended solids
Disc Filter
Available in 1.5”, 2” & 3” inlet/outlet sizeFlow range 8-40m3 /hr.Polypropylene body for 1.5” & 2” sizesM.S powder coated body for 3” size.Standard mesh size 120
As a control filter, effective against suspended solids
Fertiliser Tank
Available in 30, 60 & 90 liter capacityMS powder coated bodyNominal operating pressure 1 barMaximum pressure 5 barHead loss during fertigation 0.3 barResistant to chemicals commonly used through irrigation
Fertilizer Injection
Pressure gauge
Pressure range 0-4 barLeast count 0.2 barFitted with cock valve for enabling on/off with main pressure
Check System Pressure
Throttle Valve
As per IS 778:1984 specificationsClass 1Available in 1.5”, 2”, 2.5”& 3” size Screwed female ends to BSPTGun metal bodyMaximum working pressure 10 bar
Controlling main flowEnabling fertilizer application by creating pressure differential
 
Water Carrier System Components
PVC Pipe for main and sub-main "As per IS 4985:2000
Available in all sizes from 40 mm to 140 mm"
Used as main and submain line in drip system
Control Valve "Available in 1”, 1.5”, 2”, 2.5” & 3” sizes.
Polypropylene body
Threaded type connections"
Controlling Sectional Flow
Flush Valve "Available in 40, 50 & 63 mm sizes
Made of PVC
Solvent glue type of connection"
Flushing out impurities from the sub-main
 
Water Distribution System Components
Emitting Pipe
"Model: easy drip
As per IS 13488:1992
Available in different classes
Outside dia.-16 mm & 12 mm
Available in different class
Uniformity category-A
Working pressure range: 0.5-2 bar
Nominal emission rate 2 & 4 lph
Nominal operating pressure 1 bar
Non -pressure compensating
Emitter spacing from 30-150cm"
In vegetables, sugarcane, cotton, banana, papaya, strawberry, grapes, tobacco, flowers and medicinal plants.
Plain Lateral 16mm
"As per is 12786:1989
Class-I &II Outside dia.-16mm
Wall thickness class I : 1.25 - 1.35mm class II : 1.45 - 1.55mm
Grade of polythene pe-25
Working pressure range 2.5 – 4 bar"
Used as lateral pipe in various micro-irrigation system such as drip, micro sprinkler, micro-sprayer, jets, foggers etc.
Plain Lateral 12mm
"As per IS 12786:1989
Class- I & II Outside dia.-12mm
Wall thickness class I : 1.05 - 1.15mm class II : 1.15 - 1.25mm
Grade of polythene o pe-25
Working pressure range 2.5 – 4 bar"
Used as lateral pipe in various micro-irrigation system such as drip, micro sprinkler, micro-sprayer, jets, foggers etc.
On-line dripper 8 lph
"Model name “superdrip 8 lph”
As per is 13487:1992 Unique two piece dripper with locking arrangement Uniformity category - a Nominal emission rate 8 lph
Nominal operating pressure 1 bar
Non-pressure compensating emitter
Working pressure range 0.5-2 bar"
Suitable for orchards, plantations, field crops etc.
On-line dripper 4 lph
"Model name “Superdrip 4 lph”
As per IS 13487:1992
Unique two piece dripper with locking arrangement Uniformity category - a Nominal emission rate 4 lph Nominal operating pressure 1 bar Non-pressure compensating emitter Working pressure range 0.5-2 bar"
Suitable for orchards, plantations, field crops etc.
Spaghetti 6mm
  As extension tube for on-line emitters, jets, foggers
Sprinkler nozzle "As per IS12232:1987 & 1999
Impact drive Recommended working pressure 2-4 bar Effective working pressure 3 bar Nominal flow 2200 lph at 3 bar Diameter of coverage 28m at 3 bar pressure Coefficient of distribution uniformity (CDU) 85 – 90%"
Groundnut, grams, soybean, sunflower, wheat, fodders
HDPE pipe with QRC
"As per IS 14151:1999
Available in 63, 75 & 90 and 110 mm size All class Length of pipe 6m"
In movable sprinkler irrigation system
Jets, Micro-sprayers & Micro-sprinklers "Low maintenance open spray jets which excel in performance and reliability Wide range of spray patterns and trajectories. Colour coded nozzles for flow rate identification" "Specifically designed for orchards, vineyards, oil palms, coconut, and horticultural plants.
Ideal for plants having high water requirement and wide spread root zone.
Suitable for home gardens and landscape gardens."
Sprinkler nozzle "As per IS12232:1987 & 1999
Impact drive Recommended working pressure 2-4 bar
Effective working pressure 3 bar
Nominal flow 2200 lph at 3 bar
Diameter of coverage 28m at 3 bar pressure Coefficient of distribution uniformity (CDU) 85 – 90%"
Groundnut, grams, soybean, sunflower, wheat, fodders
 

www.nagarjuna.com
All Rights Reserved.2023